Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

  1. To install JSCAPE MFT Gateway on a Windows platform perform the following:
  2. Download JSCAPE Gateway on a different server other than JSCAPE Failover setup.
  3. Run the install.exe installation file for JSCAPE MFT Server.

    You can download JSCAPE MFT Gateway from http://www.jscape.com.
    The direct link to download JSCAPE MFT Gateway is
    http://www.jscape.com/downloads/jscape-reverse-proxy


  4. Follow the steps in the installation wizard and complete the installation process.(See Figure46)


Figure46: Installation Wizard Screen

Host/IP: Provide the hostname or IP of the machine to install the JSCAPE Gateway
Port: By default JSCAPE Gateway service runs on 20880 port but you can also change it.
Administrator login: Provide the login name to run the JSCAPE Gateway service as administrator.
Administrator password: Provide the password for administrator
HTTP host/IP: Provide the hostname or IP of the machine where you are installing JSCAPE Gateway to access Gateway application over HTTP.
HTTP Port: Provide the port on which you want to access the Gateway application through your browser over HTTP. By default it is 20881.


  1. If you are running any firewall software make sure that it is setup to allow JSCAPE MFT Gateway to run.
  2. Start the JSCAPE MFT Gateway Service.
  3. Launch JSCAPE MFT Gateway and it will ask you for the credentials to login into the Gateway Desktop manager.(See Figure47)


Figure47: JSCAPE MFT Gateway Login Screen

Host/IP: Provide the hostname or IP configured during installation of JSCAPE Gateway.
Port: Provide the port configured during installation of JSCAPE Gateway.
Username: Provide the administrator login name configured during installation of JSCAPE Gateway.
Password: Provide the administrator password configured during installation of JSCAPE Gateway.


  • No labels