After you have provided the definition of the Template, the next step while creating a Template is to define the Source application. A Source application is an application from where data is received. After defining the Source application, you must choose a Trigger.
...
Select the Source application and click Next.
However, depending upon the routing type you chose while defining the template list of available apps will vary.
Info The next screen differs depending on the chosen Source application. You can either define the next step by clearing Partner will define this step check box or allow your Partner to define these steps. Partner will define these steps while Creating a Transaction using this Template.
If you are defining this step then select the Source application account. You can either use an existing account or create a new one. Clickto add a new account. For information on how to add an account, refer to Appendix D: Supported Applications.
Info Click Test to test the connection to your account. You can allow the partner to define this step by selecting Partner will define this step check box. Partner will define these steps while Creating a Transaction using this Template.
If you are defining this step then select the trigger from the drop-down list and click Next.Info The list of triggers differs for the selected Source application. For the complete list of triggers of the supported applications, refer to Appendix D: Supported Applications.
Provide the configuration details of your account.
You can allow your partner to define this step by selecting Partner will define this step check box. Partner will define these steps while Creating a Transaction using this Template.Info In case you have selected Content/Context based routing then only company can define this step. Info If you are defining this step then for FTP or DropBox applications only, you can define the folder location using Partner parameters in the following format:
$$Partner.{PartnerParameterName}$$
where,
PartnerParameterName is the name of the parameter that you have configured for the Partner.
Ensure that you have configured the specified parameter for the Partner for which you are creating this Template.
Field Name
Description
Folder Location Folder location from where to pick files. Process all the existing records/files To process all the existing files from the specified location. Send mail notification for no data on trigger Selecting this option will send the mail notification whenever there is no data found on trigger. Send mail notification for error on trigger Selecting this option will send the mail notification whenever there is an error on trigger. Delete file on success Delete the file once it is processed. File type File format to process the files. Multiple file formats are separated by a comma. Use *.* to process all file formats. File exclude Type the file format to exclude the file type while transaction is running. Multiple file formats are separated by a comma. For example if you want to exclude text files from the FTP location, type .txt in the text box. Trigger Type You can set trigger through POLLING and CRON EXPRESSION.
POLLING: The time interval during which the Transaction triggers. By default, Transaction triggers after every 10 minutes. Select No polling option to trigger Transaction manually.
CRON EXPRESSION: Define the specific time schedule for the Transaction to trigger. For more information on how to define Cron Expression, click here.
File Stable Time You can set file stable time in the text box and select time unit from the drop-down list. This option is applicable for On File Created and On File Modified Trigger Type. The trigger will wait for the specified time for the file to become stable. For example, if you choose 30 Seconds in the stable time then system will wait for 30 seconds for the file to go stable before it triggers the transaction.
The Source application account and configuration details screen differ depending on the chosen Source application.Expand Other Settings and provides the detail.
Select Trigger in Sequence check box to trigger the Transaction in sequential manner. If you do not select the Trigger in Sequence check box then the associated Transaction will trigger concurrently.
If you want to enable misfire handling for your file event then, select the Run Once option from the Action on Misfire Event drop-down list. If you do not wish to enable misfire handling for your file event then, select the Ignore Misfire option. For more details, refer to Handling Misfire Event.
The Run Once option will run only one collective instance of all the misfires for a particular event. Whereas the Ignore Misfire option will not run a misfired event.
The default value for Action on Misfire Event field is set to Run Once for all of the earlier events.The Connector drop-down lists the APIs to connect to the FTP Server. The options changes as per your selection of the protocols that you want to use to establish FTP connection.
Protocol
Options
FTP
Native
Secured Inet FactorySFTP
J2SCH (VFS)
Secured Inet Factory
J2SSHFTPS
J2SCH (VFS)
Secured Inet FactorySelect Verbose check box, if you want to create a log file of your FTP activity. This check box is enabled only if you select Secure Inet Factory from the Connector drop-down list box.
Click Next to encrypt data.
You can either define this step by clearing Partner will define this step check box or allow your Partner to define these steps. Partner will define these steps while Creating a Transaction using this Template.
Select the Is Source File encrypted? check box if the source file is in the encrypted format. The below fields appears. Provide the details in the corresponding fields.
Field Name
Description
Key Manager Select the Key Manager from the list. To create a Key Manager, visit Account > Security Settings. To create a Key Manager, click here. Key Name The default value is the default. Private Key Password Password of the key. Confirm Password Confirm the password of the key. Click Next to select the source layout and format. This screen appears only if you have selected a file application, for example, FTP, Google Drive or REST WebHook application.
Select the source data format and source data layout for the Source application. Source data format is the format in which the data of the source file exists, for example, text, excel. Source data layout is the layout of the source file. You can either use an existing layout or create a new one. Click
to create a new layout. For information on how to create a new layout, refer to Appendix A: File Layouts. You can also define this step by clicking Partner will define this step check box or allow your Partner to define this step. The Partner will define this step while creating a Transaction using this Template.
Select Auto generate layout name and description check box if you want to auto generate the activity name and description while creating the Transaction. You can not change the automatically generated name and description.
The defined format of the auto generated name and description are explained below:
Name : Layout_transactionId_sequenceId
Description : Layout_transactionNameInfo By default, this checkbox is enabled for Create New and Select from the List or Create New policy and disabled for Default policy. - Select the type of access policy from the drop-down list. It helps the user to define the policy to displays the activity at the time of creating the transactions by another user of the same partner. The following policies are:
- Default Policy : Using this policy, user can view all layouts and also can create a new layout while creating a Transaction.
- Create New : User can only create a new layout while creating a Transaction. No layout is displayed from the drop-down list of layout field.
- Select from the List or Create New : Using this policy, user can create a new layout or user can define a custom list of layouts which will appear at transaction end.
You can select the type of schema like Text, Excel, etc. from the drop-down list of Schema Type. You can also search for the schema from the Search box.
Click Next to select the Destination application.
Next Step