This section lists the prerequisites and steps for applying and verifying this patch.

• Prerequisites
• Applying the patch
• Post patch deployment steps
• Verifying Connect Portal patch

Prerequisites

Ensure that you have:

• Read and Write permissions on all sub-folders and files of .../AdeptiaConnect-<Version>. 
• Take backup of launcher.properties file from …<ConnectPoratlInstallFolder>\conf location. This backup file will help you replicate the manual changes in case you have done earlier in the launcher.properties file before applying this patch.  
• Take backup of server.xml file from …<ConnectPortalInstallFolder>\conf location. This backup file will help you replicate the manual changes in case you have done earlier in the server.xml file before applying this patch.  
• Take backup of securityContext.xml file from …<ConnectPortalInstallFolder>\resources_config\saml location. This backup file will help you replicate the manual changes in case you have done earlier in the server.xml file before applying this patch.  
• Take backup of apps.properties file from …<ConnectPortalInstallFolder>\resources_config location. This backup file will help you replicate the manual changes in case you have done earlier in the apps.properties file before applying this patch.  
  
• Connect Server services are running.
  
• Connect Portal service is stopped.

Applying the patch

Post patch deployment steps

In this release, some manual changes are required in Connect Portal.

Changes in launcher.properties file

1. Go to …<ConnectPoratlInstallFolder>\conf location.
2. Open launcher.properties file.
3. If you have done any change in the previous file related to JVM memory parameters then do the same in the latest file. 
4. Do the same manual changes in the file in case you have done in your previous launcher.properties file (that you had saved as a backup).
5. Save the file.

Changes in server.xml File

1. Go to …<ConnectPortalInstallFolder>\conf location.
2. Open server.xml file and do the following changes:
   
   1. Add parameter secretRequired="false" in Connector tag for AJP.
      
      
      
      

   2. Copy the code in service section as shown below and paste in the existing server.xml file.

      <Service name="SoapService">
      	
      			<!-- 
      			<Connector port="80" protocol="HTTP/1.1" connectionTimeout="20000"
      			redirectPort="443" compression="on" noCompressionUserAgents="gozilla, 
      			traviata" compressableMimeType="text/html,text/xml,text/css,application/javascript,application/json" 
      			useSendfile="false" server="Adeptia" xpoweredby="false" />
      			 -->
      			
      			<!-- 
      			<Connector port="443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="5000" 
      			scheme="https" secure="true" compressionMinSize="128" connectionTimeout="20000" 
      			maxConnections="10000" clientAuth="false" sslProtocol="TLSv1.2" sslEnabledProtocols="TLSv1.2" keystoreFile="./keystore/adeptiaBPM.keystore" 
      			keystoreType="JKS" keystorePass="password" compression="on" noCompressionUserAgents="gozilla, 
      			traviata" compressableMimeType="text/html,text/xml,text/css,application/javascript,application/json" 
      			useSendfile="false" server="Adeptia" xpoweredby="false" />
      			-->
      			
      			<Engine defaultHost="localhost" name="soapwebapps">
      			
      				<Realm className="org.apache.catalina.realm.LockOutRealm">
      					<Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/>
      				</Realm>
      				
      				<Host appBase="soapwebapps/wars" autoDeploy="true" name="localhost" unpackWARs="true">
      					<Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs" pattern="%h %l %u %t &quot;%r&quot; %s %b" prefix="localhost_access_log" suffix=".txt"/>
      					<Valve className="org.apache.catalina.valves.ErrorReportValve" showReport="false" showServerInfo="false"/>
      				</Host>
      				
      			</Engine>
      	</Service>
      	
      	  <Service name="RestService">
      	
      			<!-- 
      			<Connector port="80" protocol="HTTP/1.1" connectionTimeout="20000"
      			redirectPort="443" compression="on" noCompressionUserAgents="gozilla, 
      			traviata" compressableMimeType="text/html,text/xml,text/css,application/javascript,application/json" 
      			useSendfile="false" server="Adeptia" xpoweredby="false" />
      			-->
      			
      			<!-- 
      			<Connector port="443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="5000" 
      			scheme="https" secure="true" compressionMinSize="128" connectionTimeout="20000" 
      			maxConnections="10000" clientAuth="false" sslProtocol="TLSv1.2" sslEnabledProtocols="TLSv1.2" keystoreFile="./keystore/adeptiaBPM.keystore" 
      			keystoreType="JKS" keystorePass="password" compression="on" noCompressionUserAgents="gozilla, 
      			traviata" compressableMimeType="text/html,text/xml,text/css,application/javascript,application/json" 
      			useSendfile="false" server="Adeptia" xpoweredby="false" />
      			-->
      			
      			<Engine defaultHost="localhost" name="restwebapps">
      			
      				<Realm className="org.apache.catalina.realm.LockOutRealm">
      					<Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/>
      				</Realm>
      				
      				<Host appBase="restwebapps/wars" autoDeploy="true" name="localhost" unpackWARs="true">
      					<Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs" pattern="%h %l %u %t &quot;%r&quot; %s %b" prefix="localhost_access_log" suffix=".txt"/>
      					<Valve className="org.apache.catalina.valves.ErrorReportValve" showReport="false" showServerInfo="false"/>
      				</Host>
      				
      			</Engine>
      	</Service>

3. Save the file.

Changes in securityContext.xml file

1. Go to the downloaded Adeptia Connect zip folder and rename the securityContext.xml_Portal file to securityContext.xml.
2. Copy the renamed securityContext.xml file.
3. Replace the existing file with the copied file at the following location: …<ConnectPortalInstallFolder>\resources_config\saml.
4. Open securityContext.xml file.
5. Do the same manual changes in the file in case you have done in your previous securityContext.xml file (that you had saved as a backup).
6. Save the file.

In case you are using SAML authentication then open the replaced securityContext.xml file and do the following changes:

1. Uncomment the following property:

   <!-- <property name="entityBaseURL" value="http://localhost:8080/adeptia"/> -->

2. Update the URL as required. Where localhost is the IP address and port of the Connect Server.
3. Uncomment the idp.xml property:
   
   
   
   
4. If you are using Adeptia Connect with load balancer, follow these steps:
   
   • Remove or comment out the existing contextProvider bean
     <bean id="contextProvider" class="org.springframework.security.saml.context.SAMLContextProviderImpl"/>
   • Add the below contextProvider bean
     

     <bean id="contextProvider" class="org.springframework.security.saml.context.SAMLContextProviderLB">
      <property name="scheme" value="http"/>
      <property name="serverName" value="www.myserver.com"/>
      <property name="serverPort" value="8080"/>
      <property name="includeServerPortInRequestURL" value="false"/>
      <property name="contextPath" value="/adeptia"/>
     </bean>

   This table explains the each property of contextProvider bean:

   scheme	Name of the scheme (http or https).
   serverName	Name of the server.
   serverPort	Port number of the server.
   includeServerPortInRequestURL	To include server port number in the URL or not. It must be false.
   contextPath	Prefix of a URL path used to select the context(s) to which an incoming request is passed. A URL is in the format: http://hostname.com/contextPath/, where each of the path elements can be zero or more separated elements. It must be /adeptia.
   Property Name	Description

   It will look like:

   <bean id="contextProvider" class="org.springframework.security.saml.context.SAMLContextProviderLB">
    <property name="scheme" value="http"/>
    <property name="serverName" value="www.myserver.com"/>
    <property name="serverPort" value="8080"/>
    <property name="includeServerPortInRequestURL" value="false"/>
    <property name="contextPath" value="/adeptia"/>
   </bean>

5. If there were any other changes in the old file, you have to do the same changes manually in the replaced securitycontext.xml file.
6. Save the file.
7. Restart Connect Portal.

Changes in apps.properties File

1. Go to …<ConnectPortalInstallFolder>\resources_config location.
2. Open apps.properties file.
   
   
3. Do the same manual changes in the file that you have done in your previous apps.properties file (that you had saved as backup).
4. Search for "Microsoft SharePoint" and update below content into the file:

5. # Microsoft SharePoint
   microsoftsharepoint.oauthVersion=2.0
   microsoftsharepoint.oauth20.authorize={baseUrl}/_layouts/15/OAuthAuthorize.aspx
   microsoftsharepoint.oauth20.accessToken=https://accounts.accesscontrol.windows.net/{realmId}/tokens/OAuth/2
   microsoftsharepoint.scope=Site.Manage List.Manage Web.Manage Web.Write AllSites.Manage AllProfiles.Manage
   microsoftsharepoint.AccessTokenValueMap=resource$00000003-0000-0ff1-ce00-000000000000/{domain}.sharepoint.com@{realmId}
   
   

6. Save the file.
   
   

Once the post installation steps are done, start the Connect Portal.

Verifying Connect Portal patch

Login to Adeptia Connect. If you log in successfully, indicates Connect Portal is updated successfully.

Next Step

Recovering Connect Portal