Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 18 Current »

PROXY SETTINGS SAP Setting

abpm.transportProxy

Description

Option to enable the use of a proxy server when Adeptia Suite needs to connect to any source or target location such as HTTP Server or FTP Server.

Default Value

false

Possible Values

true/false

Selection Criteria

Set this property to true, to enable Adeptia Suite to use the proxy server to connect to any source or target such as FTP Server or Mail Server etc.

 

abpm.transportProxyHost

Description

Specifies the IP address of the proxy server.

Default Value

192.168.1.129

Possible Values

Specify the IP address of the proxy Server

Selection Criteria

This property is applicable only when abpm.transportProxy is set to true.

 

abpm.transportProxyHttpPort

Description

HTTP port used by the proxy server.

Default Value

8082

Possible Values

Depends on proxy server configuration.

Selection Criteria

Specify the HTTP port, which is used by the proxy server.

 

abpm.transportProxyFtpPort

Description

FTP port used by the proxy server.

Default Value

21

Possible Values

Depends on proxy server configuration.

Selection Criteria

Specify the FTP port, which is used by the proxy server.

 

abpm.transportHttpNonProxyFtpPort

Description

Addresses of the hosts for which you want to bypass the proxy

Default Value

192.168.1.99

Possible Values

IP addresses of the all the hosts, each separated by a comma

Selection Criteria

Specify the IP addresses of all hosts for which you want to bypass the proxy server.

 

WEB SERVICE CONFIGURATION

abpm.webservice.consumer.wsdlparser.iswsdl4j

Description

Option to select the WSDL parser, either WSDL4j or EasyWSDL, used by Web Service consumer.

Default Value

false

Possible Values

true/false

Selection Criteria

This property specifies the WSDL parser used by WS Consumer.
If it is set as false, then EasyWSDL parser is used. If it is set as true then WSDL4j is used. EasyWSDL parser is upgraded parser and introduced in Adeptia Suite 6.0 version.

 

abpm.webservice.provider.wsdlparser.iswsdl4j

Description

Option to select the WSDL parser, either WSDL4j or EasyWSDL, used by Web Service provider.

Default Value

false

Possible Values

true/false

Selection Criteria

If you want to use the old WSDL parser then set true value
If you want to use the new EasyWSDL parser then set false value

Comments

Use WSDL parser WSDL4J for Web Service Provider (else use EasyWSDL)

 

abpm.webservice.consumer.wsengine.isaxis

Description

Option to select the Web Service engine, either Axis or Metro, used by Web Service Consumer.

Default Value

false

Possible Values

true/false

Selection Criteria

This property specifies the WSDL engine used by WS Consumer.
If it is set as false, then Metro is used. If it is set as true then Axis is used. It is recommended to use Metro engine.

 

abpm.webservice.provider.wsengine.isaxis

Description

Option to select the Web Service engine, either Axis or Metro, used by Web Service Provider.

Default Value

false

Possible Values

true/false

Selection Criteria

This property specifies the WSDL engine used by WS Provider.
If it is set as false, then Metro is used. If it is set as true, then Axis is used. It is recommended to use Metro engine.

abpm.webservice.host

Description

Name/IP address of host where Adeptia Suite is running

Default Value

localhost

Possible Values

localhost/IP address/hostname

Selection Criteria

Address specified here is used in the URL of the Web Service, which is published in the Adeptia Suite. It is always recommended to use the IP address of the host.

 

abpm.webservice.port

Description

The default HTTP port on which any Web Service is published.

Default Value

8080

Possible Values

Any port, which is available.

If you change the value of port here, you must put the same value in jetty while adding SSLSelectChannelSelector for jetty.

Selection Criteria

Specifies the default HTTP port, on which any Web Service is published. You can also choose the port while creating the Web Service Provider activity.

 

abpm.webservice.sPort

Description

The default HTTPs port on which any Web Service is published.

Default Value

8443

Possible Values

Any port, which is available and can be used as a secure port.

If you change the value of port here, you must put the same value in jetty while adding SSLSelectChannelSelector for jetty.

Selection Criteria

Specifies the default HTTPs port, on which any Web Service is published. You can also choose the port while creating the Web Service Provider activity.

 

abpm.webservice.serverKeyStorePath

Description

Key store path used by web server for web service SSL configuration.

Default Value

./etc/truststore/cacerts

Possible Values

Any accessible location on local system

Selection Criteria

Depends on the directory on which the key store has been created.

Comments

Use the default value that has the pre-created key store. In case you want to generate a key store, just copy that into the default location. If you have pre-created key store just use the absolute path of this key store as the property value

 

com.sun.xml.ws.fault.SOAPFaultBuilder.disableCaptureStackTrace

Description

Option to enable web service stack trace logging in WS Fault

Default Value

false

Possible Values

true/false

Comments

This property is applicable only when Metro is used as Web Service engine.

 

abpm.webservice.metro.security.dumpmessages

Description

Option to web service security dumpMessages for web service request and response

Default Value

false

Possible Values

true/false

 

com.sun.xml.ws.transport.http.HttpAdapter.dump

Description

Option to enable logging of the incoming HTTP requests and responses in web service provider

Default Value

false

Possible Values

true/false

 

com.sun.xml.ws.transport.http.client.HttpTransportPipe.dump

Description

Option to enable logging of the incoming HTTP requests and responses in web service consumer

Default Value

false

Possible Values

true/false

 

abpm.webservice.rest.jersey.dumpmessages

Description

Option to enable logging of the REST web service consumer request and response (applicable for Jersey engine only)

Default Value

false

Possible Values

true/false

 

abpm.webservice.metro.httpclient.streaming.chunksize

Description

Option to enable streaming of a HTTP request body without internal buffering.

Default Value

2048

Possible Values

NA

Comments

To disable put 0 or negative value, otherwise provide value in bytes.

 

abpm.webservice.metro.mtom.threshold.value

Description

If an attachment is smaller than the size (in bytes) specified in threshold, the system will simply inline the binary data as base64 binary instead of making it an attachment

Default Value

1024

Possible Values

NA

 

abpm.webservice.consumer.wsengine.rest.isjersey

Description

Use Jersey engine for REST webservice calls

Default Value

true

Possible Values

true/false

abpm.webservice.consumer.hostNameVerificationEnabled

Description

Do not allow HTTPS connection if the URL's hostname and the server's identification host name mismatch

Default Value

true

Possible Values

true/false

SSL CONFIGURATION

javax.net.ssl.trustStore

Description

Specifies the SSL Truststore Path

Default Value

etc/truststore/cacerts

 

javax.net.ssl.trustStoreType

Description

Specifies SSL Truststore Type

Default Value

JKS


javax.net.ssl.trustStorePassword

Description

Specifies SSL Truststore Password

Default Value

NA


javax.net.ssl.keyStore

Description

Specifies SSL Keystore Path

Default Value

etc/jetty/adeptiaBPM.keystore


javax.net.ssl.keyStoreType

Description

Specifies SSL Keystore Type

Default Value

JKS


javax.net.ssl.keyStorePassword

Description

Specifies SSL Keystore Password

Default Value

NA

 

DATA SECURITY

abpm.data.pgp.encryption.chunkSize

DescriptionThe chuck size (in bytes) to use while encrypting data size of 1 GB or more
Default Value65536
Possible VaulesPositive Number between 8 to 9223372036854775807
CommentsIf an invalid value is given, then default value will be used.

 

BUSINESS CALENDAR

org.quartz.scheduler.bCalendar

Description

Specifies list of holidays of year

Default Value

01/15/2007,02/19/2007,05/28/2007,07/4/2007,09/3/2007,10/8/2007,11/22/2007,12/25/2007NA

Possible Values

Any date in mm/dd/yyyy format

Comments

These days are assumed as holidays in Adeptia Suite calendar. If a Calendar Event is scheduled to be fired on Business Days, the process will not be fired on days specified in this property.

 

DATABASE CONNECTION

abpm.database.connectionWaitTime

Description

Denotes the time (in seconds) that the driver will wait to connect to the database.

Default Value

60

 

SCHEMA PROPERTY

abpm.schemashowfieldcount

Description

Indicates the maximum number of fields to be displayed in Text, Advanced Text, and Advanced Positional Schema

Default Value

200

Possible Values

Any Positive Integer

Selection Criteria

Specifies the maximum number of fields to be displayed when any of the following schemas is opened in an edit mode:

  • Text Schema
  • Advanced Text Schema
  • Advanced Positional Schema 

If any of the above schemas is opened in an edit mode and has more fields than the specified record, then a message is displayed.

 

abpm.schemaIgnoreBlankLine

Description

Configures the maximum number of fields to be displayed in Text, Advanced Text, and Advanced Positional Schema

Default Value

Yes

Possible Values

Yes/No

Selection Criteria

This property specifies the maximum number of fields to be displayed when any of the following schemas is opened in edit mode:

  • Text Schema
  • Advanced Text Schema
  • Advanced Positional Schema
    In case any of the above schemas is opened in edit mode and it has more than the specified record then a message is displayed.

 

abpm.connect.jsonschema.retainSpecialCharacters

Description

Retains the special characters entered in comma separated format. For example, \n,\r.

Possible Values

One or more special characters, for example, \n,\r.

MAIL

EVENT PROPERTY

abpm.mailEvent.mailProcessConcurrency

Description

Defines the maximum number of concurrent emails that can be processed by a mail event at a time

Default Value

0

Possible Values

Any positive integer. It should be based on a number of concurrent connections that the mail server is using.

Selection Criteria

Enter the maximum number of concurrent emails that can be processed at a time by mail event.
By default, this value is 0, which means there is no limit to the number of emails that can be processed by a mail event. This property is applicable for all mail events that you have in your Adeptia Suite. If want to define this number specifically on one email event, you can define it in Advanced properties of mail event.

 

abpm.mailEvent.retry

Description

Sets the number of retries when a 'MailBox in Use' error occurs

Default Value

0

Possible Values

Any positive integer. It should be based on the mail server that you are using.

Selection Criteria

Specifies the number of times a mail source, mail event, and mail polling activity will retry on 'Mailbox in Use' error before it aborts. By default, the value is 0 indicates no retries.

 

abpm.mailEvent.sleepTime

Description

Sets the sleep time (in milliseconds) before a retry takes plac when a 'Mailbox in Use' error occurs

Default Value

0

Possible Values

Any positive integer. It should be based on the mail server that you are using.

Selection Criteria

Specifies the time interval (in milliseconds) between two retries for 'Mailbox in Use' error. By default, this value is 0 implies that time interval is 2 seconds. This property is applicable if the abpm.mailEvent.retry property is greater than 0.

 

TARGET PROPERTY

abpm.target.createFolder

Description

Option to create any non-existing parent directory on target location (for Secured FTP Target and LAN File Target activity using VFS option)

Default Value

yes

Possible Values

Yes/No

 

EVENT

abpm.event.concurrency

Description

Maximum number of files that will be processed by an event in each polling frequency

Default Value

-1

Possible ValuesAny positive integer. 0 indicates an infinite number of files.

EVENT METADATA

abpm.eventMetadata.retainTime

Description

Maximum number of days to keep the files in the metadata

Default Value

30

Possible ValuesAny positive integer.

 

abpm.eventMetadata.cleanupCronExpression

Description

Time (in cron expression) when the cleanup runs

Default Value

0 0 3 * * ? (means 3 AM)

Possible ValuesCron Expression

 

 

 

abpm.webservice.consumer.hostNameVerificationEnabled
  • No labels