Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

You need to enable HTTP service on the Primary JSCAPE MFT server in order to receive messages routed from JSCAPE MFT Gateway. Follow the below steps to enable HTTP service on JSCAPE MFT server:

If you have failover settings defined in the Primary JSCAPE MFT server then it will automatically synchronize with the Failover server and HTTP services would be enabled for the Failover server also.
If failover settings are not defined then you need to enable the HTTP service on both the nodes of the JSCAPE cluster manually.


  1. Run the JSCAPE MFT Manager on the Primary JSCAPE server.
  2. Go to Server > Settings option. New window will pop-up.(See Figure57)


Figure57: JSCAPE MFT Server Manager Screen

  1. Now select the "Services" option from the left pane. A new window would pop-up.(See Figure58)


Figure58: Services Screen

  1. Click on the 'Add' button at bottom to add the new service. A new window would pop-up.(See Figure59)


Figure59: Add Service Screen

  1. Now select the "HTTP/S" as the protocol and click OK to add HTTP service.
  2. Now you can receive as2 messages routed from JSCAPE Gateway to your server.



  • No labels