Adding a Cluster in JSCAPE MFT Gateway

To configure a cluster in JSCAPE MFT Gateway follow the below steps:

Run the Gateway Desktop manager application.
Go to "Clusters" option displayed on the left pane.(See Figure48)

Figure48: JSCAPE MFT Gateway Screen

Click on 'Add' button to add a new cluster. A new window would pop-up.(See Figure49)

Figure49: Add Cluster Screen

Provide the name for your cluster and select the protocol as "HTTP". Now click on "Add" button on bottom of "Add Cluster" screen to add hosts/nodes to your cluster. A new 'Add Host' would open up.(See Figure50)

Figure50: Add Host Window

Host: Provide the hostname or IP of the Primary JSCAPE MFT Server.
Port: Provide the port on which HTTP services are running on Primary JSCAPE MFT server.
Note: 192.168.1.1 is given for demonstrative purpose only, your Primary JSCAPE MFT Server may have been configured on some other host or IP.

Click on Ok to add the first host to the cluster. Now again repeat step 4 to add second host (JSCAPE MFT Failover server) to your cluster.(See Figure51)

Figure51: Add Host Screen

Host: Provide the hostname or IP of the Failover JSCAPE MFT Server.
Port: Provide the port on which HTTP services are running on Failover JSCAPE MFT server.
Note: 192.168.1.2 is given for demonstrative purpose only, your Failover JSCAPE MFT Server may have been configured on some other host or IP.

Click on OK button after configuring the failover node in the cluster. Now you would see both the host under the Add Cluster screen.(See Figure52)

Figure52: Add Cluster Screen with configured Hosts

Click on OK to create the cluster. You could now see your cluster created on JSCAPE Gateway Manager Screen.(See Figure53)

Figure53: JSCAPE MFT Gateway screen