Page Comparison

To configure a cluster in JSCAPE MFT Gateway follow the below steps:

1. Run the Launch Gateway Desktop manager application.
2. Go to "Clusters" option displayed on Click Clusters from the left pane.(See Figure48)

...

1. Click on 'Add ' button to add a new cluster. A new window would pop-up.(See Figure49)
   

...

1. 
   Image Added
   
   The Add Cluster window appears.
2. Provide the name for your cluster and select the protocol as "HTTP". Now click on "Add" button on bottom of "Add Cluster" screen
3. Click Add to add hosts/nodes to your cluster. A new 'Add Host' would open up.(See Figure50)
   

...

Image Removed

...

1. 
   Image Added
   
   The Add host window appears.
2. Provide the hostname or IP address of the Primary JSCAPE MFT Server in the Host text box.

...

1. Provide the port on which HTTP services are running on

...

1. the primary JSCAPE MFT server in the Port text box. 

...

1. Click on Ok to add the first host to the cluster. Now again repeat step 4 to add second host Click OK.
   
   Image Added
   
   
2. Repeat steps 6 to 8 to add a second host (JSCAPE MFT Failover server) to your cluster.(See Figure51)

...

1. Click on OK button after configuring the failover node in the cluster. Now you would see both the host under
2. Now, you can see both the hosts on the Add Cluster screen.(See Figure52)
   
   Image Modified
   

...

1. 
   
2. Click on Click OK to create the cluster. You could can now see your cluster created on JSCAPE Gateway Manager Screen.(See Figure53)
   
   Image Modified

...