Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Corrected links that should have been relative instead of absolute.

An important prerequisites for a secure communication between the web browser (end user) and the web server is to use Secure Sockets Layer (SSL) certificate. Adeptia Connect microservices also adheres to this requirement. To achieve this, after you've deployed Adeptia Connect, you need to configure SSL in the Webapp Gateway microservice or the Kubernetes Ingress Controller (if in use as a front-end for Webapp Gateway).

Configuring SSL in Webapp Gateway microservice

In case you're not using any Kubernetes ingress controller, you need to configure SSL certificate in Webapp Gateway microservice that will be running on any LoadBalancer type Kubernetes service. To achieve this, follow the steps given below in the same order.

Table of Contents
maxLevel3
minLevel3

Generating SSL certificate

  1. Open Terminal.
  2. Run the following Keytool command to create a Keystore for Jetty with a self-signed certificate or CA signed certificate. In case Keytool is not installed on your system, install it by referring to the tool documentation. 

    Expand
    titleFor self-signed certificate
    To generate SSL certificate for Jetty with a self-signed certificate:

    Code Block
    languagecss
    themeMidnight
    keytool -genkey -keyalg <keyalg> -alias <alias_name> -keystore <keystore_name> -storepass <password> -validity <days> -keysize <keysize> -ext SAN=ip:<FQDN/IP of the Webapp Gateway>,dns:<domain_name>

    Where,

    <keyalg> specifies the algorithm to be used to generate a key pair.

    <alias_name> is a unique string to identify the Keystore.

    <keystore_name> is the location and filename where you want to store the generated key.

    <password> is the password to protect the private key of the generated key pair, default is changeit.

    <days> are the number of days certificate will expire.

    <keysize> specifies the size of each key to be generated.

    <FQDN/IP of the Gateway> is the IP address or FQDN of the Webapp Gateway.

    <domain_name> is the name of the domain you are using. It is not necessary to use the domain name in the command above. However, for easy identification, it is recommended to use the domain name.

    For example,

    keytool -genkey -keyalg RSA -alias selfsigncert -keystore certs.jks -storepass changeit -validity 365 -keysize 2048 -ext san=ip:10.44.2.59

    keytool -genkey -keyalg RSA -alias selfsigncert -keystore certs.jks -storepass changeit -validity 365 -keysize 2048 -ext san=dns:localhost


    Expand
    titleFor CA signed certificate

    To generate SSL certificate for Jetty with a CA signed certificate:

    1. Generate Keystore

      Code Block
      languagecss
      themeMidnight
      keytool -genkey -keyalg <keyalg> -alias <alias_name> -keystore <keystore_name> -storepass <password> -validity <days> -keysize <keysize>

      Where,           

      <keyalg> specifies the algorithm to be used to generate a key pair.

      <alias_name> is a unique string to identify the Keystore.

      <keystore_name> is the location and filename where you want to store the generated key.

      <password> is the password to protect the private key of the generated key pair, default is changeit.

      <days> are the number of days certificate will expire.

      <keysize> specifies the size of each key to be generated.

      For example,

      keytool -genkey -keyalg RSA -alias server -keystore certs.jks -storepass changeit -validity 365 -keysize 2048

      If you are using multiple domain names for the same certificate then you need to use SAN (Subject Alternative Name) while generating Keystore.

      Code Block
      languagecss
      themeMidnight
      keytool -genkey -keyalg <keyalg> -alias <alias_name> -keystore <keystore_name> -storepass <password> -validity <days> -keysize <keysize>
      -ext SAN=ip:<FQDN/IP of the Webapp Gateway>

      Where, <FQDN/IP of the Webapp Gateway> is the IP address or FQDN of the Webapp Gateway.

    2. Generate CSR from the generated Keystore
      Run the following Keytool command to create a Certificate Signing Request (CSR).

      Code Block
      languagecss
      themeMidnight
      keytool -certreq -alias <alias_name> -file <domainname>.csr -keystore <keystore_name>.jks -storepass <password>

      This command will generate a <domainname>.csr file to sign from CA.

    3. If you are using multiple domain names for the same certificate then you need to use SAN (Subject Alternative Name) while generating CSR for the Keystore.

      Code Block
      languagecss
      themeMidnight
      keytool -certreq -alias server -file <domainname>.csr -keystore <keystore_name>.jks -storepass password -ext san=ip:<IP_Address_of_Connect_Server_machine>


      Send this CSR to your CA to generate SSL certificate. After your SSL certificate is generated, you need to import the certficate in the Java Keystore.

    4. Import CA Signed SSL Certificate into Java Keystore.   

      You might get multiple SSL certificates from your CA. You need to import all these SSL certificates into your Keystore. Ensure that you use the same Keystore that is used in generating CSR while importing SSL certificates.

      1. Import Trusted Root certificate into Java Keystore.

        Code Block
        languagecss
        themeMidnight
        keytool -import -trustcacerts -alias root -file <certificate_name>.crt -keystore <domain_name>.jks


      2. Import Intermediate certificate into Java Keystore. 

        Code Block
        languagecss
        themeMidnight
        keytool -import -trustcacerts -alias intermediate -file <certificate_name>.crt -keystore <domain_name>.jks


      3. Import domain certificate into Java Keystore

        Code Block
        languagecss
        themeMidnight
        keytool -import -trustcacerts -alias server -file <certificate_name>.crt -keystore <domain_name>.jks

        Where,

        <certificate_name> is the name of the CA certificate.

        <domain_name> is the name of the domain you are using.

    While executing the command, you will be prompted to provide other details. The default password is password. You can change the password. Note the Keystore password for future references.

  3. Run the following Kubectl command to copy the certificate to the PVC or shared storage volume for any available Webapp Gateway pod.

    Code Block
    languagecss
    themeMidnight
    Kubectl --namespace <namepace_name> cp <local_path_for_SSL_certificate> <pod_name>:shared/keystore/<Keystore_File_name> 


  4. Edit the Kubernetes deployment object of Webapp Gateway microservice to update the below environment variables as per your Keystore path and password.
    SSL_KEYSTORE_PATH
    SSL_KEYSTORE_PASSWORD

    Once you've updated the Kubernetes deployment object of Webapp Gateway microservice, the pods corresponding to the Webapp Gateway microservice will be redeployed automatically. 

Anchor
Exporting the public key
Exporting the public key
Exporting the public key of Webapp Gateway 

The steps for exporting the public key of the Webapp Gateway external URL (external FQDN, for example, dummy.adeptia.comvary from browser to browser. It is recommended that you export the key using DER encoded binary format X.509 (.CER). Following are the steps to export the public key in Google Chrome browser.

  1. Enter the Adeptia Connect application URL (client-specific according to client domain) in the browser.
    The login page opens.
  2. Click  > More tools > Developer tools.
  3. Click Security tab. 
  4. Click View Certificate.



  5. On the Certificate window, on the Details tab, click Copy to File.



  6. Click Next to start exporting the certificate.



  7. Choose DER encoded binary X.509 (.CER) and click Next.



  8. Specify the location to save the exported file and click Next.



  9. Click Finish to export.
  10. Click OK to exit from the wizard.

Anchor
Importing the certificate
Importing the certificate
Importing the Webapp Gateway certificate 

This section helps you to import SSL certificate in the microservices Truststore.

Following the steps given below, you'd be able to import the SSL certificate in the Webapp Gateway microservice Truststore with an alias name adeptia.

  1. Run the following Kubectl command to copy the certificate to the PVC or shared storage volume for the Webapp Gateway pod.

    Code Block
    languagecss
    themeMidnight
    Kubectl --namespace <namepace_name> cp <local_path_for_SSL_certificate> <pod_name>:shared/truststore/<SSL_certificate_name> 


  2. Navigate to the Microservice pod (Eg. Webrunner) by running the following command.

    Code Block
    languagecss
    themeMidnight
    Kubectl --namespace <namespace_name> exec -it <pod_name> -- sh 


  3. Run the following Keytool command to import the certificate.

    Code Block
    languagecss
    themeMidnight
    keytool -import -trustcacerts -file <Path_of_SSL_Certificate> -alias <alias_name> -keystore <Path of cacerts file>

    Where,

              <Path_of_SSL_Certificate> is the path of SSL certificate.

              <Path of cacerts file> is the path of Truststore.

    For example,

    Code Block
    languagecss
    themeMidnight
    keytool -import -trustcacerts -file shared/truststore/ssl-certs.cer -alias adeptia -keystore shared/truststore/cacerts

    You'll be prompted to enter a password. Enter the default password changeit.

  4. Run the exit command to exit from the pod shell.
  5. Restart all the Microservices to bring the changes into effect.

Configuring Webapp Gateway/LoadBalancer FQDN/IP

You need to configure Webapp Gateway/LoadBalancer FQDN/IP (Domain name assigned to webapp-gateway Kubernetes service) environment variable in other microservices.

Edit the Kubernetes deployment object of Event, Portal, and Webrunner microservices to update the below environment variables as per your Webapp Gateway domain name. The image below is an example showing the environment variable and a dummy Webapp Gateway URL as a value for this variable.

Verifying SSL

To verify if the SSL certificate is configured in Adeptia Connect:

  1. Open the browser and hit the Webapp Gateway URL, for example, https://dummy.adeptia.comto access Adeptia Connect using https protocol.
  2. Adeptia Connect login page appears. Verify your certificate by checking https protocol color in the address bar. If you have used CA signed certificate then https protocol will be green in color  () . In case you've used self-signed certificate, the https protocol will be red in color ().


Panel
borderStylesolid
titleYou may be interested in...
What is new
Application architecture
Key terms
Usage scenarios