Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

The patch will automatically recover if any error occurs. In case, you want to recover the patch manually, follow the steps described later in this section.  

This section lists the prerequisites and steps for recovering the patch.

Prerequisites:

Ensure that you have:

  • You have Read and Write permissions on all subfolders and files of .../AdeptiaConnect-<Version>. 
  • Stopped the services, i.e., Kernel, WebRunner, and AIMap.

Steps to recover the patch:


 For Windows
  1. Open the Command Prompt.
  2. Go to the folder from where you applied the patch.
  3. Run the following command to recover the patch:

    Recover-Patch.bat “<Path where Adeptia Connect is installed till AdeptiaServer folder>”

    For example:
    Recover-Patch.bat "C:/Program Files/AdeptiaConnect/AdeptiaConnect-x.x/ ConnectServer/AdeptiaServer"  

  4. Once the patch is recovered, a confirmation message will be displayed.
  5. Start the services, i.e. Kernel, WebRunner, and AIMap.
 For Linux
  1. Open the Terminal.
  2. Go to the directory from where you applied the patch.
  3. Run the following command to recover the patch:

    ./Recover-Patch.sh <Path where Adeptia Connect is installed till AdeptiaServer folder> 

    For example:
    ./Recover-Patch.sh /mnt/AdeptiaConnect-x.x/AdeptiaServer 

  4. Once the patch is recovered, a confirmation message will be displayed. 
  5. Start the services, i.e. Kernel, WebRunner, and AIMap.


Remove all the changes done manually at the time of deploying the patch.

Post Recovery Steps:

After recovery of this patch, you will have to manually perform these steps:

  1. Paste the backup jetty.xml file (that you had saved as backup) at the …<ConnectServerInstallFolder>\AdeptiaServer\ServerKernel\etc\jetty location.

  2. If you have enabled Lucene in Adeptia Connect then go to …<ConnectServerInstallFolder>\AdeptiaServer\ServerKernel location and open the indexes folder. 

    You can perform this post recovery step only after applying the Connect Portal patch.
    • Delete the list of files from each sub-folder of the indexes folder.
    • To use the Lucene (Search Functionality) after applying the patch:
      • Go to Account > My Company
      • Click Indexing
      • On Indexing screen, click Index Now.
  • No labels