Verifying Installation

You need to verify the installation, for this start Kernel and WebRunner and then perform the following steps:

To verify the installation:

1. Open the browser and type the URL in the below format:
   

   <protocol_name>://<IP_address>:<port_number>

    where,
              <protocol_name> is the name of the protocol you are using, for example, HTTP.
              <IP_Address> is the IP address of the computer on which Adeptia Connect is installed.
              <port_no> is the port number of the computer on which Adeptia Connect is installed.  

   For example, http://192.168.1.1:80

    

2. Adeptia Connect login page appears, indicating a successful installation. The default credentials are:
   
   User Name: admin
   Password: indigo1
   
   
   

Next Step

Configuring SSL in Adeptia Connect

See Also

Enabling Clustering

Configuring Internal Load Balancer