Page Comparison

In a typical scenario of a data transaction, data is transferred from source to destination. However, in some cases, a Company or Partner may need to further process the data received at the destination. For further processing of this already processed data, you would use post processing Transaction. 

Like any other Transaction, you need to create a Template first for post processing. A post processing Template will include a Process Flow published in Adeptia Connect. Based on your requirement type for the post processing of the received data, you can also use an already created transaction (for which Pre Process app is the source) instead of a Process Flow. You must use Post Process app in the destination to facilitate the creation of post processing Template/Transaction. 

You can create a Post Process Template either

• Using a Process Flow, or
• Using a Transaction

...

You will find this application at Destination only. Using this application, you can create a Template either using a Process Flow or Transaction.

Following are the high-level steps for using this application:

Creating a Template Using a Process Flow 

Prerequisites

For using a Process Flow in a Post Process Template, ensure that you have:

...

1. Select Post Process app while defining the Destination application.
   
   
   
   
2. Select Process Flow from the Select Post Process Type drop-down list.
3. Select the process flow from the Select Process Flow drop-down list. Only published process flow will be populated in the drop-down list.
4. Click Add Parameters to add parameters. Define the keys and their values. The specified values will be put in the context of the child flow. 
   
   
   
   

Creating a

...

Using a Transaction 

To create a Template:

1. First, create a Template using Pre Process application as a Source application.
   
   
   
   
2. After creating a Template, create  create a Transaction using Transaction using this Template.
3. Now, create a Template using Post Process application as a Destination application. 
   1. Select Post Process app while defining the Destination application.
      
      
      
      
   2. Select Transaction from the Select Post Process Type drop-down list.
   3. Select the Pre Process Transaction from the Select Transaction drop-down list. Only Pre Process Transactions will appear in the drop-down list.
   4. Click Add Parameters to add parameters. Define the keys and their values. The specified values will be put in the context of the child flow. 
      
      

...